TONGSHENG

What is an aligning ball bearing?

There are two types of inner holes of self-aligning ball bearings: cylindrical and conical. The taper of the conical inner hole is 1:1 2 or 1:30. In order to enhance the lubrication performance of the bearing, an annular oil groove and three oil holes are processed on the outer ring of the bearing.

10

23-11

Precautions for using deep groove ball bearings

Contact with corrosive chemical media, the bearings are not cleaned cleanly, dirt adheres to the surface, or the bearings are touched with sweaty hands. After cleaning, the bearings are not packaged or installed in time, and are exposed to the air for a long time, and are attacked by air moisture and contamination; contamination

02

23-11

Application and installation of deep groove ball bearings

Deep groove ball bearings can be used in gearboxes, instruments, motors, household appliances, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, engineering machinery, roller skates, yo-yos, etc.

30

23-10

Precision Bearings: The Impact of Fatigue Pitting on Precision Bearing Troubleshooting

The life of precision bearings is closely related to production, manufacturing, installation and application, so doing it well at each stage can make the precision bearings reach operating conditions and increase the service life of the precision bearings.

02

23-10

Physical properties of high temperature resistant materials for bearings

Air permeability: The air permeability of SKF bearing high temperature resistant materials can be expressed by the air permeability coefficient, that is, the air volume of SKF in the lm2 area of 1m thick bearing high temperature resistant materials under 1m. The pressure difference is 10 Pa.

10

23-09

< 12 > proceed page